SPEC
Frame MORIWAKI original
Swingarm MORIWAKI original
Front fork Honda RS125
Engine Honda CRF250X
Exhaust system MORIWAKI original
Rear suspension Honda RS125
Wheels Honda RS125
Brakes Honda RS125
Seat rail MORIWAKI original
Step kit MORIWAKI original
Cowls MORIWAKI original
Radiator Honda RS125 modified
Meter panel assembly Honda RS125
Carburetor Keihin FCR φ40
Specifications
model MD250H
length 1830mm
width 560mm
height 1050mm
wheelbase 1230mm
engine model ME11E
displacement 249.4cm3
riding capacity 1
tires front:95/70R17
rear:115/70/R17
ground clearance 120mm
starter type electric starter
type water-cooled 4-cycle
cylinder arrangement single, inclined 10° from vertical
combustion camber profile pent roof
valve train chain driven OHC
bore × stroke 78.0×52.2mm
compression ratio 12.9:1
lubrication
type forced pressure & wet sump
lubricant oil capacity engine:0.85L
transmission:0.75L
coolant capacity 1.2L
fuel tank capacity 7.0L
carburetion
model FCR12B
throttle valve 19.0×60.0mm
venturi diameter 40mm(@maximum lift)
throttle bore 43mm
ignition system
type CDI
spark plug(NGK) R0409B-10
spark plug gap 0.6-0.7mm
clutch
type multi-plate wet
control left hand control
primary reduction ratio 3.611(65/18)
transmission
type constant mesh
gear ratio 2.387
1.750
1.333
1.041
0.814
final primary
type chain
reduction ratio 2.117(36/17)
front axle
caster angle 24.5°
trail length 122mm
tire pressure
front 176.5kPa (1.8kgf/cm2)
rear 186.3kPa (1.9kgf/cm2)
left-hand side 15°
right-hand side 15°
front hydraulic single-disc
rear hydraulic single-disc
front type inverted telescopic
rear type Pro-Link
type twin-tube